Brother International PT-3600 Users Manual - English and Spanish - Page 77

Functions Ch. 3 Functions Mirror Printing function (d + p) This function prints your label so that the text can be read from the adhesive side of the tape. If mirror-printed labels are attached to glass or some other transparent material, they can be read correctly from the opposite side. NOTE When using the Mirror Printing function, the text should be printed on clear tape. OFF ON Stamp Stencil function (d + S) The Stamp Stencil function allows you to quickly and easily create your own stamp stencil films for chemical etching. After inserting a stamp film cassette, select this function to adjust the text to a perfect thickness for the pre-inked stamp film holders. Since the stamp holder is reusable, just make a new stamp stencil film and replace the one in the holder. To make a stamp: 1 Type in the text, and then insert a medium (3/4" (18-mm)-wide) or large (1" (24 mm)wide) stamp film cassette. 2 Hold down d and press S. When ON is selected, the Mirror Printing indicator at the top of the display comes on. R1 2 3 4 5 6 7 8 9 A B C D E RRRG H RI RJ NO > 1LM:_ AUTO 1.10 HELSINKI A F K QQQQQQQQQQQQ AUTO Length Margin Font Width Size To print a mirror image of the text: 1 Hold down d and press p. R1 2 3 4 5 6 7 RRRG H RI RJ NOMLMIORFRFOR AUTO 1.10 89 ABC HELSINKI D E A F K QQQQQQQQQQQQ AUTO Length Margin Font Width Size 2 Press m or g until the desired setting is displayed. NOTE ☞ To return the function to its default setting (OFF), press the space bar. ☞ To return to the text without changing the formatting, press e (OR hold down d and press p). 3 Press n to apply the setting. R1 2 3 4 5 6 7 8 9 A B C RRRG H RI RJ NOLMSTOAFMFP MODE AUTO 1.10 HELSINKI D E A F K QQQQQQQQQQQQ AUTO Length Margin Font Width Size NOTE If a stamp is created using this function, be sure to use the Tape Length function to select left and right label margins of 1" (25 mm). 3 Press m or g until the desired setting is displayed. NOTE ☞ To return the function to its default setting (OFF), press the space bar. ☞ To return to the text without changing the set- ting for the Stamp function, press e (OR hold down d and press S). 4 Press n. If ON was selected, the text is automatically adjusted for stamps. 5 Press p to cut print resolution out of the stamp stencil film. 6 After the stamp stencil film is cut off, remove the backing paper from the stamp stencil film and affix it to the ink pad of a stamp film holder. Refer to Assembling stamps on page 39. 65