Brother International PT-3600 Users Manual - English and Spanish - Page 53
Stamping, ink is lost when the stamp film is changed.
UPC - 012502602804
View all Brother International PT-3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Getting Started Ch. 2 Getting Started Stamping Since the length of time and amount of pressure that the stamp holder should be held down depends on the amount of ink in the holder, first practise stamping on a piece of scrap paper. You can expect to use a stamp film holder approximately 300 to 500 times, although some ink is lost when the stamp film is changed. The actual life of the stamp film holder will vary depending on the size and thickness of the characters, whether a shading pattern is used, etc. NOTE ☞ After stamping, wait until the ink has completely dried before touching it in order to prevent smearing. ☞ If the stamp holder is not pressed straight down, the stamp may be blurred. ☞ Do not press the stamp holder down too forcefully. ☞ Do not stamp on wet, sticky, rough or uneven surfaces. Only stamp on paper. The ink will not dry on plastic overhead projector transparencies and other ink-impermeable objects. ☞ If a stamp made with a new stamp film is faint or incomplete, even after forcefully pressing down the stamp holder for up to 30 seconds, replace the stamp holder with a new one. Do not try to refill the stamp holder. 41