Brother International IntelliFax-4100 Users Manual - English - Page 65

Setup Send, Before You Begin, Using the ADF (Automatic Document Feeder - paper jam

Page 65 highlights

6 Setup Send 6 Before You Begin Before you begin sending faxes, please be sure to read all the instructions and cautions listed below for placing originals in the automatic document feeder. Using the ADF (Automatic Document Feeder) I Documents must be between 5.8 and 8.5 inches wide between 3.9 and 14.1 inches long. Your machine can scan an image only 8.15 inches wide, regardless of how wide the paper is. I Fan the pages before placing them in the ADF. I Make sure you insert documents face down, top edge first. I Adjust the paper guides to fit the width of your document. I The ADF (automatic document feeder) can hold up to 30 Pages, feeding each one individually through the machine. If you "Stagger" the pages, the ADF can hold up to 50 pages. Use standard (17 lb-24 lb) paper when using the ADF. If you're using heavier paper, feed each sheet individually to prevent paper jams. DO NOT use curled, wrinkled, folded or ripped paper, or paper with staples, paper clips, paste or tape attached. DO NOT use cardboard, newspaper or fabric. I Make sure documents written in ink are completely dry. I Before you send a fax press Resolution to select the resolution for the document you're sending. (See Fax Resolution, Page 6-5.) If you send faxes from a computer on the same phone line and your Brother machine intercepts them, set Easy Receive to OFF. SETUP SEND 6-1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156

SETUP SEND
6 - 1
6
6
Setup Send
Before You Begin
Before you begin sending faxes, please be sure to read all the instructions and
cautions listed below for placing originals in the automatic document feeder.
Using the ADF (Automatic Document Feeder)
Documents must be between 5.8 and 8.5 inches wide between 3.9 and 14.1
inches long. Your machine can scan an image only 8.15 inches wide, regardless
of how wide the paper is.
Fan the pages before
placing them in the ADF.
Make sure you insert
documents
face down, top
edge first
.
Adjust the paper guides to
fit the width of your
document.
The
ADF
(automatic
document feeder) can hold up to 30 Pages, feeding each one individually
through the machine. If you “Stagger” the pages, the ADF can hold up to 50
pages. Use standard (17 lb–24 lb) paper when using the ADF. If you’re using
heavier paper, feed each sheet individually to prevent paper jams.
Make sure documents written in ink are completely dry.
Before you send a fax press
Resolution
to select the resolution for the
document you’re sending. (See
Fax Resolution
, Page 6-5.)
DO NOT
use curled, wrinkled, folded or ripped paper, or paper with staples,
paper clips, paste or tape attached.
DO NOT
use cardboard, newspaper or fabric.
If you send faxes from a computer on the same phone line and your Brother
machine intercepts them, set Easy Receive to OFF.