Canon 40MC Elura Instruction Manual - Page 52

Adding digital effects during playback E You can add digital effects during playback by using the wireless controller only. Digital effects added during playback aren't recorded onto the original tape. Set the manual capture multi-image screen only while in normal/reverse playback pause mode or slow forward/reverse playback mode. Set the automatic capture multi-image screen while in normal/reverse playback pause mode. (See p. 23, 24 for information on the various playback modes.) MENU SET D.EFFECTS ON/OFF AUDIO MIX BALANCE MONITOR ST-1 ST-2 1. Turn the POWER switch to VCR. 2. Set your tape to the point where you want to start the digital effect. 3. Press the D.EFFECTS button. • The digital effects menu appears. 4. Select with the r/t buttons and the SET button. • Fader, effect and multi-image screen settings appear. 5. Select a setting with the r/t buttons. Using the Full Range of Features 6. Push the D.EFFECTS button. • Your selection flashes in the display. 7. Push the ON/OFF button. • If you have selected an effect, it takes effect on the display. • If you have selected a fader, the display stops flashing. • If you have selected the multi-image screen, the display stops flashing. - Manual multi-image screen: As you press the ON/OFF button, scenes will be captured one after another the indicated number of times. - Automatic multi-image screen: The camera will capture the indicated number of images. - After all the images are captured, the camera returns to playback pause mode. - Press ON/OFF or stop to cancel the multi-image screen. 52