Canon 40MC Elura Instruction Manual - Page 55
Push the docking unit onto the camera and turn the locking screw
UPC - 013803014938
View all Canon 40MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
1. Make sure that the ELURA is switched off. 2. Lift the MULTI-CONNECTOR cover and align the multi- E connectors of the docking unit and the camera. 3. Push the docking unit onto the camera and turn the locking screw clockwise to fix it securely onto the base. • To remove, turn the locking screw counter-clockwise and pull the docking unit from the base of the camera. Make sure to close the cover. For greater creative control over audio recording, you can connect an external microphone to the camera via the DU-200 Docking Unit's MIC terminal. You can monitor the sound while recording by attaching stereo headphones to the H terminal on the docking unit. You can adjust the volume of attached headphones by turning the selector dial. • A VOLUME bar appears in the display to indicate the current volume. • The selector dial also controls the speaker volume once you remove the headphones from the headphone socket (p. 21). REMOTE DC MIC Using the Full Range of Features Wind screen The camera has an automatic wind screen to prevent wind noise from interfering with the sound track. (It does not operate with an external microphone). Make sure it's off when you want the microphone to be as sensitive as possible. Use the wind screen when recording in windy places such as the beach or near buildings. WIND SCREEN•OFF (see p. 30, 31) 1. Open the camera menu and point the arrow at WIND SCREEN. 2. Select the ON setting and close the menu. • WS O is shown in the display. 55