Canon 40MC Elura Instruction Manual - Page 82

Audio Dubbing You can add sound to the original sound on a prerecorded tape from audio E products (AUDIO IN) or with the internal or external microphone (MIC. IN). The original sound will not be erased. For best results, add sound to tapes that have been recorded with this camera in SP mode with 12-bit sound. If there are nonrecorded portions on the tape, or portions recorded in LP mode, or with 16-bit or 12-bit, 4-channel sound, dubbing may be interrupted or you may not be able to dub audio correctly. If your tape hasn't been recorded with 12-bit sound, we recommend dubbing your original tape onto a blank tape using the ELURA's analog line-in function, then dubbing audio onto the new tape. Make absolutely sure to set the audio mode of the new tape to 12 bit and the recording mode to SP. To connect other audio equipment: DV IN/OUT A/V IN/OUT S IN/OUT STV-250 Stereo Video Cable OUTPUT AUDIO L R An audio device (i.e. CD player) Notes: • Do not use the yellow video terminal. • The A/V terminal doesn't put out any video, so connect the S-video terminals and check your TV, or check the LCD or the viewfinder as you add new sound. Always check the new sound with the speaker, or the headphones if you have the docking unit attached. To connect the external microphone: You will need to attach the DU-200 Docking Unit (optional). Editing DC MIC Notes: • When you add sound using the built-in microphone, make sure not to connect any audio input cables to the MIC terminal on the docking unit. • To use your TV to monitor video, connect the S-video terminal or the A/V terminal (use only the video plug) to your TV. You can monitor the sound with 82 headphones.