Canon FS400 FS40 / FS400 Instruction Manual - Page 28

Selecting an Option from the FUNC. Menu, Selecting an Option from the Setup Menus - guide

Page 28 highlights

Selecting an Option from the FUNC. Menu The following is an example of selecting a FUNC. menu option in mode. In playback modes, the operation varies depending on the function selected so refer to the relevant chapter as necessary. 1 Press FUNC. . 2 Select ( ) the icon of the function you want to change from the left side column. Menu items not available will appear grayed out. 3 Select ( ) the desired setting from the available options at the bottom bar. • The selected option will be highlighted in orange. • With some settings you will need to make further selections and/or press . Follow the additional operation guides that will appear on the screen (such as the icon, small arrows, etc.). 4 Press FUNC. to save the settings and close the menu. You can press FUNC. to close the menu at any time. Selecting an Option from the Setup Menus 1 Press FUNC. . 2 Select ( ) [ Menu] and press to open the setup menus. You can also hold FUNC. pressed down for more than 1 second to open directly the setup menus screen. 3 Select ( ) the tab of the desired menu. 4 Select ( ) the setting you want to change and press . • The orange selection bar indicates the menu setting currently selected. Menu items not available appear grayed out. • Move ( ) the orange selection bar to the tabs at the top of the screen to select a different menu (step 3). 5 Select ( , setting. ) the desired option and press to save the 28 Š Preparations

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133

28
Preparations
Selecting an Option from the FUNC. Menu
The following is an example of selecting a FUNC. menu option in
mode. In playback modes, the operation varies depending on the
function selected so refer to the relevant chapter as necessary.
1 Press
.
2
Select (
) the icon of the function
you want to change from the left
side column.
Menu items not available will appear
grayed out.
3
Select (
) the desired setting from the available options at the
bottom bar.
The selected option will be highlighted in orange.
With some settings you will need to make further selections and/or
press
. Follow the additional operation guides that will appear on
the screen (such as the
icon, small arrows, etc.).
4 Press
to save the settings and close the menu.
You can press
to close the menu at any time.
Selecting an Option from the Setup Menus
1 Press
.
2
Select (
) [
Menu] and press
to open the setup menus.
You can also hold
pressed
down for more than 1 second to
open directly the setup menus
screen.
3
Select (
) the tab of the desired menu.
4
Select (
) the setting you want to change and press
.
The orange selection bar indicates the menu setting currently
selected. Menu items not available appear grayed out.
Move (
) the orange selection bar to the tabs at the top of the
screen to select a different menu (step 3).
5
Select (
,
) the desired option and press
to save the
setting.
FUNC.
FUNC.
FUNC.
FUNC.
FUNC.