Canon FS400 FS40 / FS400 Instruction Manual - Page 42
Power Saving Mode] setting. Press - - camcorder - flash card
View all Canon FS400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
2 When you wish to resume recording, open the LCD panel. The ON/OFF (CHG) indicator turns back green and the camcorder is ready to record. IMPORTANT • Do not disconnect the power source during standby mode (while the ON/OFF (CHG) indicator is lit in orange). NOTES • The camcorder will not enter standby mode if the LCD panel is closed while the ACCESS indicator is on or flashing, while a menu is being dis- played, or while the PHOTO button is pressed down halfway. The cam- corder may also not enter standby mode if the LCD panel is closed while the memory card slot cover is open or when the battery charge is too low. Check that the ON/OFF (CHG) indicator changes to orange. • The camcorder will shut off if left in standby mode for 10 minutes, regardless of the [Power Saving Mode] setting. Press POWER to turn on the camcorder. • You can select the length of time until shut-off or turn off the Quick Start function altogether with the [Quick Start] setting. 42 Video