Canon FS400 FS40 / FS400 Instruction Manual - Page 79
Using an Eye-Fi card, Pre-selecting Record, ings from the Index Screen
View all Canon FS400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
3 Copy the photos. FUNC. [ Copy ( [OK] FUNC. )] Desired option [Yes]* * If you selected an option other than [This Photo], you can press to interrupt the operation while it is in progress. Options [All Photos] Copies all the photos. [This Photo] Copies only the photo marked with the orange selection frame. [Selected Photos] Copies all the photos selected in advance (marked with a checkmark). Refer to Pre-selecting Recordings from the Index Screen ( 48). IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder's operating mode. • When copying photos onto an Eye-Fi card, photos will be uploaded automatically if you are within the range of a configured network. Always verify that Eye-Fi cards have been approved in the country/ region of use. See also Using an Eye-Fi card ( 88). NOTES • In the following cases, you will not be able to copy recordings to the memory card: - If the memory card slot is open. - If the LOCK switch on the memory card is set to prevent writing. - If there is no memory card in the memory card slot. • If there is not enough space on the memory card, as many photos as possible will be copied before stopping the operation. Photos 79