Canon FS400 FS40 / FS400 Instruction Manual - Page 39
Selecting the Video Quality Recording Mode
View all Canon FS400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
• Be sure to save your recordings regularly ( 83), especially after making important recordings. Canon shall not be liable for any loss or corruption of data. NOTES • About the Power Save mode: If [Power Saving Mode] is set to [ On], the camcorder will shut off automatically to save power when it is powered by a battery pack and is left without any operation for 5 minutes. Press POWER to turn on the camcorder. • When recording in bright places, it may be difficult to use the LCD screen. In such cases, you can turn on the LCD backlight ( 24) or adjust the brightness of the LCD screen with the [LCD Bright- ness] setting. Selecting the Video Quality (Recording Mode) The camcorder offers 3 recording modes. Changing the recording mode will change the recording time available on the memory. Select XP mode for better movie quality; select LP mode for longer recording times. The following table gives approximate recording times. Operating modes: FUNC. [ Standard Play 6 Mbps] mode FUNC. Desired recording NOTES • The camcorder uses a variable bit rate (VBR) to encode video so the actual recording times will vary depending on the content of the scenes. • The camcorder retains the last setting used even if you set the cam- corder to mode. Video 39