Canon FS400 FS40 / FS400 Instruction Manual - Page 57
Manual Exposure Adjustment
View all Canon FS400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Applying the Selected Digital Effect 1 Open ( ) the joystick guide. 2 Select ( ) [ Digital Effects] and press . • The icon of the selected digital effect turns green. • Press again to deactivate the digital effect (its icon will turn white again). Digital Effects To fade in/out Activate the selected fader in record pause mode ( ), then press Start/Stop to start recording with a fade in. Activate the selected fader while recording ( ), then press Start/Stop to fade out and pause the recording. To activate an effect For movies: Activate the selected effect while recording or in record pause mode. For photos: Activate the selected effect and then press PHOTO to record the photo. NOTES • When you apply a fader, not only the picture but also the sound will fade in or out. When you apply an effect, the sound will be recorded normally. • Faders cannot be used when recording video snapshot scenes or when pre-recording is activated. Manual Exposure Adjustment At times, backlit subjects may appear too dark (underexposed) or subjects under very strong lights may appear too bright or glaring (overexposed). To correct this, you can manually adjust the exposure. Operating modes: Video 57