Canon MX700 MX700 series Network Setup Guide - Page 12
-B Setting up an additional LAN-connected computer, Setup Method, Set up, only the computer
UPC - 013803081336
View all Canon MX700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2-B Setting up an additional LAN-connected computer This section describes how to set up an additional computer to use the machine over wired LAN, when the machine has already been set up to connect to the network using another computer. This setup procedure only requires settings to be performed on the additional computer. 1 Make sure that the machine is connected to the network device with a LAN cable, then turn on the machine. When the machine is turned on, the Power lamp lights up green. Note z If MAC or IP address filtering is configured to restrict access to the machine, make sure beforehand to register those addresses of the computer you are setting up. z Make sure that the computer you are setting up is not connected to the machine with a USB cable. This setup procedure does not involve connecting the USB cable. 2 On the Setup Method screen, select Set up only the computer for network use, then click Next. 12