Canon MX700 MX700 series Network Setup Guide - Page 20

11 When the Installation completed successfully screen appears, click Restart. Remove the CD-ROM after clicking Restart and restarting the computer. Note Keep the CD-ROM in a safe place in case you need to reinstall the software. When the computer restarts, the Canon IJ Network Tool will start up automatically. When using Mac OS X v.10.2.8 to v.10.3.3: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine off then back on again. Note When using Mac OS X v.10.2.8 to v.10.3.x, before using the Operation Panel on the machine to save scanned originals to the computer, it is necessary to select MP Navigator EX as the launch application on Image Capture under Applications. For details, refer to "Scanning Images" in the User's Guide on-screen manual. 12 Confirm the connection type. The next procedure varies depending on how you intend to connect the machine and the computer. Setting up for use over LAN See "2-A Setting up for use over LAN" on page 21. Setting up an additional LAN-connected computer See "2-B Setting up an additional LAN-connected computer" on page 24. To use a USB connection, refer to your setup sheet. 20