Canon PowerShot SX10 IS PowerShot SX10 IS Camera User Guide - Page 138

136 Auto Exposure Bracketing (AEB Mode) Available Shooting Modes p. 284 In this mode, the camera automatically changes the exposure within a set range to take three shots at the same interval as continuous shooting (p. 108). The images are shot in the following order: Standard exposure, underexposure and overexposure. 1 Select AEB. 1. Press the button. 2. Use the or button to select and use the or button to select . 3. Press the DISP. button. 2 Adjust the compensation range. 1. Adjust the compensation range with the or button. 2. Press the button. • The compensation range can be set as wide as 2 levels lower and 2 levels higher than the standard exposure value (the compensated exposure Standard exposure Compensation range value if exposure adjustment was performed) at the center point in 1/3 increments. If exposure adjustment (p. 134) is already done, setting can be done with the adjusted value as the center point. To Cancel the AEB Mode: Select in Step 1. The AEB mode is not available when shooting with the flash on. Only one standard exposure image will be recorded.