Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual Win - Page 168

◦ Enable/disable Wi-Fi Select Enable to wirelessly connect via wireless router. ◦ Wi-Fi setup Select how to setup Wi-Fi. ▪ Easy wireless connect Select if you specify the settings of the access point information to the printer directly from a device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen instructions of the connecting device for the setup procedure. ▪ Manual connect Select when you perform settings for Wi-Fi manually using the operation panel of the printer. ▪ WPS (Push button method) Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected Setup (WPS) push button method. Follow the on-screen instructions during setup. ▪ Other connection types ▪ Manual connect (adv.) Select when you perform settings for Wi-Fi manually. You can specify multiple WEP keys. ▪ WPS (PIN code method) Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup. Note • By tapping Advanced, you can set LAN in detail. For the items that can be set, see the following. Advanced • Wireless Direct The following setting information on the Wireless Direct connection is displayed. (Some items are not displayed depending on printer settings.) Items Connection Network name (SSID) Password Communication mode Channel Wi-Fi security IPv4 address IPv4 subnet mask IPv4 default gateway Setting Enable / Disable DIRECT-XXXX-GP-NNNN*1 XXXXXXXXXX (10 characters) Wireless Direct 3 WPA2-PSK (AES) XXX. XXX. XXX. XXX (12 characters) XXX. XXX. XXX. XXX (12 characters) XXX. XXX. XXX. XXX (12 characters) 168