Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual Win - Page 203

Selecting Enable HTTPS redirection redirects the communication using CHMP to encrypted communication. Note • To use CHMP for encrypted communication, you need to register the printer's root certificate to your computer. Registering Printer's Root Certificate to Local Computer for SSL Communication • CHMP is a Canon proprietary protocol. ◦ Network interface settings To connect to a hub that supports STP, select Enable. Selecting Enable perform the intermittent data reception when connecting to the network. ◦ DRX settings Selecting Enable perform the intermittent data reception when connecting to the network. ◦ IP filtering Allows or denies access for specific IP addresses. Settings for both IPv4 and IPv6 addresses can be specified. Important • If the device address for administrator has been set to rejection by mistake, tap (Network) on the HOME screen of the operation panel, and then tap LAN settings > Wi-Fi / Wireless Direct / Wired LAN > Settings > Advanced setup > Reset LAN settings, and initialize network information of the printer. After resetting, perform setup again as necessary. ◦ MAC address filtering settings Allows or denies access for specific MAC addresses. Important • If the device address for administrator has been set to rejection by mistake, tap (Network) on the HOME screen of the operation panel, and then tap LAN settings > Wi-Fi / Wireless Direct / Wired LAN > Settings > Advanced setup > Reset LAN settings, and initialize network information of the printer. After resetting, perform setup again as necessary. ◦ Reset LAN settings Initializes the network settings on the printer. After resetting, perform setup again as necessary. 203