Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual Win - Page 346

Preparing to Transfer the Printer To protect the internal parts in transit, always follow these steps before transferring the printer to a new location. For details on installing printer after transfer, see Reinstalling the Printer. Important • Avoid tilting the printer excessively in transit. This may cause ink in the printer to leak and cause stains. Note • The maintenance cartridge replacement may be required when you execute the Prepare to move menu. Prepare the maintenance cartridge in advance while referring below. The number of maintenance cartridge required varies depending on the amount remaining in the maintenance cartridge being used. • If you can move the printer in a level state using casters or something similar, you do not need to execute Prepare to move. • Always follow the instructions of the service representative when preparing to transfer the printer. The following lists transport restrictions by type of transport. Move on the same floor Usage Examples: Move indoors by carrying Transport and storage in low temperature environments: No Required maintenance cartridges: 1 Transport outdoors Usage Examples: Transport by vehicle Transport and storage in low temperature environments: Yes Required maintenance cartridges: 1 Preparing for Transportation 1. Remove the paper. • Rolls Removing the Roll from the Printer • Sheet Removing Sheets 2. If touch screen indicates to replace maintenance cartridge, replace maintenance cartridge. Replacing the Maintenance Cartridge 346