Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual Win - Page 177

Paper-related settings This setting item is displayed by tapping Printer settings after tapping screen. (Setup) on the HOME • Keep media type Select Enable to keep using the same type of paper. • Manage remaining roll amount Selects the method to manage remaining roll amount and that to display warning when the roll is running short. ◦ Barcodes Manages remaining roll amount by using a barcode. By using the barcode every time you replace a roll, you can manage remaining roll amount properly. Specify the roll length properly when you load a new roll. ◦ Warning message only Estimates remaining roll amount by using media type and roll diameter information. A warning appears when remaining roll amount comes closer to the specified value. Depending on the environment you are using the printer, selecting this setting may not manage remaining roll amount as precisely as you expected. We recommend you select a higher value for this setting item. ◦ Disable Select to disable managing remaining roll amount. • Roll amount warning settings Specifies when to warn the remaining roll paper amount. • Detect paper setting mismatch Selects printer action when you start printing with the paper size, the media type, and print settings different from those registered. • Advanced paper settings Specifies advanced paper settings for each paper type. • Paper size recognition settings Selects which size is preferred when paper size detection is enabled. ◦ Roll paper setting 1 Select whether B4 or 10 inch is applied when a roll of an intermediate size is detected. ◦ Roll paper setting 2 Select whether A3 or 300 mm is applied when a roll of an intermediate size is detected. ◦ Roll paper setting 3 177