Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual Win - Page 528

Defaults Restores all the settings you have changed to their default values. Clicking this button restores all the settings on the current screen to their default values (factory settings). Paper Detailed Settings dialog box Drying Time Wait time can be set to allow ink to dry. Between Pages settings are only enabled for roll paper. Between Pages The wait time until outputting paper can be set after printing one page. Time is taken before cutting roll paper to allow the ink to dry, so even when Automatic Cutting in the Roll Paper Options dialog box of the Page Setup tab is set to Yes, page may be dropped into the basket with dried ink. Printer Default Settings in printer unit operation panel are applied. None Page will be output immediately after printing 30 sec. / 1 min. / 3 min. / 5 min. / 10 min. / 30 min. / 60 min. Page will be output after set amount of time has passed after printing. Between Scans The wait time until printing next scan can be set after printing one scan in page. Set in the event smudging occurs in the page, unevenness occurs in borderless printing, etc., and you would like to avoid this smudging and unevenness. Printer Default Settings in printer unit operation panel are applied. None Next scan will be print immediately after first scan is print. 0.5 sec. / 1sec. / 3sec. / 5sec. / 7sec. / 9sec. Next scan will be print after the set amount of time has passed after printing one scan. * If smudges and/or unevenness occur, please increase time. Roll Paper Safety Margin In order for heavily curling paper to absorb well in platen, length of margin established on edge of paper can be selected. Near End Margin Roll Near End Margin length can be set. Printer Default Settings in printer unit operation panel are applied. 3mm Will be print in standard size. * Please select when there are no particular problems with printing. 20mm Please select when rubbing of the print heads occurs, such as when heavily curling paper is being used. 528