Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual Win - Page 536

Moving the slider to the left reduces the amount of extension and expands the range of the document to print. Three-sided Borderless If you check this check box, and the width or the length of the output paper size is smaller than the roll width, a margin will be created on the right of the document, and the remaining three sides (top, bottom, and left) will be borderless when printing. Custom Size Settings dialog box (Roll Paper Width) Enter the roll width you want to use. Roll Paper Width Specify the Width of the roll paper. Measurement is shown according to the units specified in Units. Units Select the unit for entering a user-defined paper size. Roll Paper Options dialog box You can specify settings for printing on roll paper. Automatic Cutting You can print cut guidelines for cutting the roll paper automatically or manually after printing. Yes Cut the roll paper automatically after printing. No Do not cut the roll paper automatically after printing. Print Cut Guideline Prints cut guidelines for cutting the roll paper manual after printing. Banner Printing Select this check box to print documents with several pages as one continuous document. When you do this, the spaces between the pages will be removed. Output Method dialog box Set the method for exporting the print job to the printer's hard disk drive. Output Method Print After the printing ends, the print job is not saved to the printer's hard disk drive. Set PIN for printing Set a PIN code for print jobs to prevent issues such as retrieving the wrong documents and allowing others to peek at your documents. PIN Enter a one to seven-digit number. 536