Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual Win - Page 172

◦ Set printer name Specifies the printer name. You can use up to 15 characters for the name. Note • You cannot use the same printer name as that already used for other LAN connected devices. • You cannot use a hyphen for the initial or last character of the printer name. ◦ TCP/IP settings Performs IPv4 or IPv6 setting. ◦ WSD settings Setting items when you use WSD (one of the network protocols supported in Windows 10, Windows 8.1, and Windows 7). ▪ Enable/disable WSD Selects whether WSD is enabled or disabled. Note • When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows 10, Windows 8.1, and Windows 7. ▪ Optimize inbound WSD Selecting Enable allows you to receive the WSD printing data faster. ▪ Timeout settings Specifies the timeout length. ◦ Bonjour settings Setting items for LAN using Bonjour. ▪ Enable/disable Bonjour Selecting Enable allows you to use Bonjour to perform the network settings. ▪ Service name Specifies the Bonjour service name. You can use up to 48 characters for the name. Note • You cannot use the same service name as that already used for other LAN connected devices. ◦ SNTP settings Performs various settings for SNTP (Simple Network Time Protocol). ◦ Spanning tree settings Enables/Disables spanning tree. Selecting Enable avoids circulating data on a network. ◦ LPR protocol settings Enables/Disables the LPR setting. ◦ RAW protocol Enables/Disables RAW printing. 172