Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual Win - Page 169

IPv4 DNS dynamic settings Enable / Disable IPv4 DNS host name XXXXXXXXXXXX IPv4 DNS domain name XXXXXXXXXXXX IPv6 link-local address XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters) IPv6 link-local prefix length XXX (up to 3 digits) MAC address XX:XX:XX:XX:XX:XX (12 characters) IPsec settings Disable Printer name XXXXXXXXXXXXXXX (up to 15 characters) Bonjour service name XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX (up to 52 characters) *1 means printer's model name ("XX" represents alphanumeric characters.) To change the setting, tap Settings. ◦ Enable/disable Wireless Direct Select Enable to wirelessly connect without wireless router. ◦ Update SSID/password Updates the identifier (SSID) and password. ◦ Wireless Direct network (SSID) Changes the name (device name) of the printer displayed on Wi-Fi Direct compatible device. ◦ Connection request confirmation Changes the display / non-display of the confirmation screen when Wi-Fi Direct compatible devices are connected to the printer. Note • By tapping Advanced, you can set LAN in detail. For the items that can be set, see the following. Advanced • Wired LAN The following setting information on the Wired LAN connection is displayed. (Some items are not displayed depending on printer settings.) Items Connection IPv4 address IPv4 subnet mask Setting Enabled (connected) / Enabled (disconnected) / Disable XXX. XXX. XXX. XXX (12 characters) XXX. XXX. XXX. XXX (12 characters) 169