Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual Win - Page 594

Remove a Jammed Sheet Remove Jammed Paper (Paper Feed Slot) Roll paper cannot be inserted into the Paper Feed Slot Roll Paper Remains/Lacks under Quantity Management Cannot load sheets Paper is not cut straight Paper is not cut Cutter Blade Does Not Work While Cutting Is in Progress The size of clear film cannot be detected Margins are wide When printing on roll paper, the printed surface becomes scratched Printing Does Not Start Printer Suddenly Stopped Working for Some Reason The Data lamp on the Operation Panel does not light up The printer does not respond even if print jobs are sent "Preparing the ink system." is displayed "Agitating the ink" is displayed Message Is Displayed and Borderless Printing Fails The Printer Stops During a Print Job Printing stops and an error message is displayed The printer ejects blank, unprinted paper Cannot Print over Network Cannot Connect Printer to Network Cannot Print over TCP/IP Network Cannot Print over Bonjour networks Cannot Find Printer on Network Cannot Find Printer During Setup Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen Searching Printer by IP Address or Host Name During Setup Cannot Find Printer while Using Wi-Fi Cannot Find Printer while Using Wired LAN Cannot Print Using AirPrint Installation Problems Removing Printer Software Taking Time to Setup Process (Windows) Failed to Printer Driver Installation (Windows) Other Problems Printer does not turn on If the Printer Makes a Strange Sound Messages advising to check the maintenance cartridge are not cleared Printer consumes a lot of ink Ink Level Detection 594