Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual Win - Page 315
Head Replacement, Start head replacement.
View all Canon imagePROGRAF GP-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 315 highlights
The Maintenance screen appears. 2. Tap Head Replacement. 3. Tap Start head replacement. Ink begins being drawn in. When it finishes, instructions for the print head replacement procedure appear on the touch screen. It takes about 1 to 2 minutes for ink to be drawn into the system and remove ink from the print head. 4. Open top cover. 5. If the print head locking cover and print head lock lever are dirty, use a damp cloth that you have wrung out completely to wipe them clean. Important • Do not touch the linear scale (A) or carriage shaft (B). Touching these may cause malfunction. 315
The
Maintenance
screen appears.
2.
Tap
Head Replacement
.
2.
3.
Tap
Start head replacement.
3.
Ink begins being drawn in. When it finishes, instructions for the print head replacement procedure
appear on the touch screen.
It takes about 1 to 2 minutes for ink to be drawn into the system and remove ink from the print head.
4.
Open top cover.
4.
5.
If the print head locking cover and print head lock lever are dirty, use a damp cloth that
5.
you have wrung out completely to wipe them clean.
Important
•
Do not touch the linear scale (A) or carriage shaft (B). Touching these may cause malfunction.
•
315