Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual Win - Page 632

Margins are wide Check 1 Is auto cut being used on printed material with a wide margin on the trailing edge only? Rolls are advanced a specific amount before cutting to prevent problems with cutting and paper ejection. This operation is normal. The specified length varies depending on the media type and the usage environment (humidity). Please refer to the minimum printing length of the paper from paper information list. If the length of the printed document is shorter than the minimum cut length, an extra edge margin will be added to increase the length of the printed document to the minimum cut length. Paper Information List (Rolls) Check 2 Is leading edge detection set to Do not detect? Do not detect may have been set by responding to the message Do you want to set to detect the leading edge of the paper? when Cutting mode was set to User cut in the touch screen menu. If the message Do you want to set to detect the leading edge of the paper? appears when setting Cutting mode to User cut, select Detect (recommended). Please note that if Detect (recommended) is selected and the paper has a strong curl, the Print head may rub against the edge of the paper when printing starts. Specifying the Cutting Method for Rolls 632