Cisco 3750G-12S Hardware Installation Guide - Page 50
Rack-Mounting, Removing Screws from the Switch - 24t
UPC - 746320812526
View all Cisco 3750G-12S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Installing the Switch Rack-Mounting Chapter 2 Switch Installation Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety: • This unit should be mounted at the bottom of the rack if it is the only unit in the rack. • When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack. • If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Statement 1006 To install the switch in a 19-inch or 24-inch rack (24-inch racks require optional mounting hardware), follow the instructions described in these procedures: • Removing Screws from the Switch, page 2-12 • Attaching Brackets to the Catalyst 3750G-24TS Switch, page 2-14 • Attaching Brackets to the Catalyst 3750G Integrated Wireless LAN Controller Switches, page 2-17 • Attaching Brackets to All Other Catalyst 3750 Switches, page 2-18 • Mounting the Switch in a Rack, page 2-24 • Attaching the Cable Guide, page 2-26 Note When you install the switch in a 24-inch rack, an optional bracket kit that is not included with the switch is required. You can order a kit containing the 24-inch rack-mounting brackets and hardware from Cisco. For the Catalyst 3750G-24TS switch, order part number RCKMNT-3550-1.5RU=. For the other Catalyst 3750 switches, order part number RCKMNT-1RU=. The Catalyst 3750G-24WS-S25 and the 3750G-24WS-S50 switch do not support 24-inch rack-mounting. Removing Screws from the Switch If you plan to install the switch in a rack, you must first remove the screws in the switch chassis so that you can attached the mounting brackets. • Figure 2-9, Figure 2-10, and Figure 2-11 show how to remove the chassis screws in a 1-rack-unit (RU) switch. • Figure 2-12 shows how to remove the chassis screws in a 1.5-RU switch. • Figure 2-13 shows how to remove the chassis screws in a 2-RU switch. 2-12 Catalyst 3750 Switch Hardware Installation Guide OL-6336-10