Compaq ProLiant 1000 Migrating to Microsoft Windows NT Server 4.0 on Compaq Se - Page 16

467A/0197 WHITE PAPER (cont.) ... Error Message Comments SNMP.EXE unable to locate SNMPAPI.DLL in specified The SNMP error only occurs if you enabled the service path. before starting. DHCP Server will now terminate because existent database needs conversion to Windows NT SVR format. DHCP will auto start after conversion. The DHCP error only occurs if you previously installed DHCP. \WINS cannot come up because it needs conversion to Windows NT SVR format. Click OK to terminate WINS, WINS will auto start after conversion. The WINS error only occurs if you previously installed WINS. Service Control Manager states that at least one service or driver failed during start-up. There can be multiple causes of this error message. Check the event viewer or log under Administration Tools and correct any issues that might have been overlooked. 11. Remove SNMP and re-install the SNMP Services from the Control Panel icon, select the NETWORK applet, select the Services tab (next to the Identification tab), double click on the SNMP Service, follow the instructions. Remove the SNMP services and then re-install. 12. Install SSD 1.20, or later, select Express, update all the necessary components, and reboot the server. Do NOT update the HAL using the Compaq SSD program with version 1.20. 13. Reboot the server. 14. Re-install the Compaq Insight Manager Agents (version 3.10 or higher), if they were previously installed, from the Compaq System Manager CD. Select Update to load the latest version of the Compaq Insight Manager Agents. Reboot the computer or server. If you choose to re-install a pre-existing version, remove the Agents before re-installing. NOTE: Always install the Compaq SSD program and reboot the server before installing the Compaq Insight Manager Agents. 15. You can optionally install Microsoft Service Pack 2. Your upgrade should be complete. However, check the Event Viewer for additional information. 16