Compaq ProLiant CL380 Compaq ProLiant CL380 Software User Guide - Page 20
Fast Ethernet NIC adapters from the Compaq Server Support
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
System Setup and Configuration for Microsoft Windows NT Server 4.0, Enterprise Edition 1-9 17. Between 30 and 60 seconds after you press the F6 key, the Windows NT Server 4.0, Enterprise Edition installer will display a default list of mass-storage devices that will be installed. Press the S key to specify an additional device. 18. Press the down arrow to select the Other option and press Enter. The next screen prompts you to insert the device support diskette provided by the adapter manufacturer into the diskette drive of the server node. 19. Insert the Compaq Server Support for Microsoft Windows NT 4.0 diskette that contains CPQARRY2.SYS into the diskette drive and press Enter. 20. Press the down arrow to select the Compaq Integrated Smart Array/42xx/43x Controllers option. NOTE: The entire driver list may not fit on the screen, so you may have to press the down arrow until you find the Compaq Integrated Smart Array/42xx/43x Controllers option. 21. When the appropriate Compaq Integrated Smart Array/42xx/43x Controllers option is highlighted, press Enter. 22. The Compaq Integrated Smart Array/42xx/43x Controllers driver you selected in the previous step should be on the list of drivers to be installed. If it is present, press Enter to continue with the installation of the operating system. If the driver is not in the list, press the S key to return to the selection screen. IMPORTANT: Leave the diskette in the drive until you are instructed to remove it. 23. During the installation of the operating system on this server node, Microsoft Windows NT Server 4.0, Enterprise Edition does not detect the correct network adapter. Uncheck the detected adapter (Intel 82557 based 10/100 Ethernet PCI Adapter) and install the correct network adapter (Compaq Ethernet or Fast Ethernet NIC adapters) from the Compaq Server Support for Microsoft Windows NT 4.0 set of diskettes. The files necessary to install the correct network adapter are located in the \NET\INTELNIC folder. 24. After the installation of Windows NT Server 4.0, Enterprise Edition has completed, you must install Service Pack 3, followed by the Compaq Server Support for Microsoft Windows NT 4.0 software. IMPORTANT: You must update the array controller driver using the Custom Update option of the SSD even if the array controller driver is current.