Compaq ProLiant CL380 Compaq ProLiant CL380 Software User Guide - Page 23
The Compaq Integrated Smart Array/42xx/43x Controllers driver
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
1-12 Compaq ProLiant CL380 Software User Guide 16. Insert the Windows NT Server 4.0, Enterprise Edition CD in the drive and start the installation of the operating system by booting directly from the operating system CD. Do not boot the system from diskettes built from the operating system CD. 17. Press the F6 key within five seconds when the Windows NT Setup blue screen appears to begin the array controller driver installation. If dialog displays in the bottom left hand corner of the screen before you press the F6 key, you must restart the installation. NOTE: There will be no text on the screen instructing you to press the F6 key. 18. Between 30 and 60 seconds after you press the F6 key, the Windows NT Server 4.0, Enterprise Edition installer will display a default list of mass-storage devices that will be installed. Press the S key to specify an additional device. 19. Press the down arrow to select the Other option and press Enter. The next screen prompts you to insert the device support diskette provided by the adapter manufacturer into the diskette drive of the server node. 20. Insert the Compaq Server Support for Microsoft Windows NT 4.0 diskette that contains CPQARRY2.SYS into the diskette drive and press Enter. 21. Press the down arrow to select the Compaq Integrated Smart Array/42xx/43x Controllers option. NOTE: The entire driver list may not fit on the screen, so you may have to press the down arrow until you find the Compaq Integrated Smart Array/42xx/43x Controllers option. 22. When the appropriate Compaq Integrated Smart Array/42xx/43x Controllers option is highlighted, press Enter. 23. The Compaq Integrated Smart Array/42xx/43x Controllers driver you selected in the previous step should be on the list of drivers to be installed. If it is present, press Enter to continue with the installation of the operating system. If the driver is not in the list, press the S key to return to the selection screen. IMPORTANT: Leave the diskette in the drive until you are instructed to remove it. 24. During the installation of the operating system on this server node, Microsoft Windows NT Server 4.0, Enterprise Edition does not detect the correct network adapter.