Compaq ProLiant CL380 Compaq ProLiant CL380 Software User Guide - Page 67
CR3500 RAID Controller., The controller creates RAID sets while it handles I/O activity. A rate
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
CR3500 Configuration Utility 4-15 I Read-ahead cache limit-Enter the desired read-ahead limit (0-16). If you enter 0, the read-ahead is disabled. Each increment equals 32 blocks of data that are read ahead in the cache. For example, 2 would equal 64 blocks read-ahead. I Controller mode-Shows the controller mode, which is active or unavailable. I Rebuild rate-Enter the desired rebuild rate, which ranges from 1 to 100. The controller rebuilds while it handles I/O activity. A rate below 50 emphasizes I/O response over the RAID rebuild. A rate above 50 puts a higher priority on the RAID rebuild at the expense of I/O activity. I Create rate-Enter the desired create rate, which ranges from 1 to 100. The controller creates RAID sets while it handles I/O activity. A rate below 50 emphasizes I/O response over the RAID set creation. A rate above 50 puts a higher priority on the RAID set creation at the expense of I/O activity. I Firmware revision-Shows the current firmware revision of the CR3500 RAID Controller. I Serial number-Shows the serial number of the controller. I Connection type-Shows the connection type, which can be serial or SCSI.