Compaq ProLiant CL380 Compaq ProLiant CL380 Software User Guide - Page 50
Verifying Functionality of the Cluster, Verifying Direct and NetWare Links
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
3-8 Compaq ProLiant CL380 Software User Guide Verifying Functionality of the Cluster Now that the software is installed, you can verify the creation of the cluster from the NHAS Console. All three links under Connection Status will show CONNECTED. See Figure 3-1. Figure 3-1. NHAS: Connected Verifying Direct and NetWare Links To test Direct Link Disconnect: 1. Remove the network cable from the server's network card to which Direct Link is dedicated. The Direct Link status on the NHAS screen should change from CONNECTED to NOT CONNECTED. 2. Reconnect the network cable to the network card. The Direct Link status should change from NOT CONNECTED to CONNECTED. To test NetWare Link Disconnect: 1. Remove the network cable from the server's network card to which NetWare Link is dedicated. The NetWare Link status should change from CONNECTED to NOT CONNECTED. 2. Reconnect the network cable to the network card. The NetWare Link status should change from NOT CONNECTED to CONNECTED.