Compaq ProLiant CL380 Compaq ProLiant CL380 Software User Guide - Page 22

Select Step 5: Save and Exit, then press, Select Step 3: View or Edit Details. - user manual

Get Compaq ProLiant CL380 PDF manuals and user guides View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

System Setup and Configuration for Microsoft Windows NT Server 4.0, Enterprise Edition 1-11 4. When prompted to select an installation path, select the Manual Configuration path. Follow the guided installation process. If you need help, refer to the online help by clicking on the Help button. 5. After the operating system has been selected, SmartStart runs the System Configuration Utility and configures the server node's hardware. The adapter card in each server node that is connected to the shared storage RAID controller must have a unique SCSI ID number. IMPORTANT: Server node 2 cannot have the same SCSI ID as server node 1. For example, if server node 1 is set for SCSI ID 7, then server node 2 must be set to ID 6. 6. To verify or change the SCSI ID number after the system configuration is done, select Review or Modify Hardware Settings, then press Enter. This allows you to see all of the hardware settings. 7. Select Step 3: View or Edit Details. 8. Press the down arrow to select Compaq 64-Bit Dual Channel Wide Ultra2 SCSI Controller (Port1). Underneath this heading is a subheading titled SCSI ID. To change the setting, highlight the SCSI ID option and then press Enter. After making a new selection, press Enter to accept the change. 9. Press F10 to exit. 10. Select Step 5: Save and Exit, then press Enter and wait for the Compaq Array Configuration Utility to start. 11. When the Array Configuration Utility starts, select Continue, then click Next. NOTE: The Compaq Array Configuration Utility configures the Integrated Smart Array Controller. Refer to the Compaq Integrated Smart Array Controller User Guide for additional information on using the Compaq Array Configuration Utility. 12. Click Next to select a controller configuration. 13. Select the desired RAID level and click Continue. 14. Click Finish. 15. After the system reboots, SmartStart will finish copying the system partition to the hard drive and will instruct you to replace the SmartStart CD with the operating system CD. SmartStart is no longer involved in the installation process.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
System Setup and Configuration for Microsoft Windows NT Server 4.0, Enterprise Edition
1-11
4.
When prompted to select an installation path, select the Manual
Configuration path. Follow the guided installation process. If you need
help, refer to the online help by clicking on the Help button.
5.
After the operating system has been selected, SmartStart runs the
System Configuration Utility and configures the server node
’
s hardware.
The adapter card in each server node that is connected to the shared
storage RAID controller must have a unique SCSI ID number.
IMPORTANT:
Server node 2 cannot have the same SCSI ID as server node 1. For
example, if server node 1 is set for SCSI ID 7, then server node 2 must be set to ID 6.
6.
To verify or change the SCSI ID number after the system configuration
is done, select Review or Modify Hardware Settings, then press
Enter
.
This allows you to see all of the hardware settings.
7.
Select Step 3: View or Edit Details.
8.
Press the down arrow to select Compaq 64-Bit Dual Channel Wide
Ultra2 SCSI Controller (Port1). Underneath this heading is a subheading
titled SCSI ID. To change the setting, highlight the SCSI ID option and
then press
Enter
. After making a new selection, press
Enter
to accept
the change.
9.
Press
F10
to exit.
10.
Select Step 5: Save and Exit, then press
Enter
and wait for the Compaq
Array Configuration Utility to start.
11.
When the Array Configuration Utility starts, select Continue, then click
Next.
NOTE:
The Compaq Array Configuration Utility configures the Integrated Smart Array
Controller. Refer to the
Compaq Integrated Smart Array Controller User Guide
for
additional information on using the Compaq Array Configuration Utility.
12.
Click Next to select a controller configuration.
13.
Select the desired RAID level and click Continue.
14.
Click Finish.
15.
After the system reboots, SmartStart will finish copying the system
partition to the hard drive and will instruct you to replace the
SmartStart CD with the operating system CD. SmartStart is no longer
involved in the installation process.