Compaq ProLiant CL380 Compaq ProLiant CL380 Software User Guide - Page 34
Manual Installation Using SmartStart, Configuring the Server Nodes
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
2-6 Compaq ProLiant CL380 Software User Guide 4. Press Print Screen to access the KVM switch and choose server node 2 from the list. NOTE: For detailed instructions on using the KVM switch, refer to the Compaq ProLiant CL380 User Guide. 5. Install and configure the Cluster Service component on node 2. NOTE: Refer to the Microsoft Windows 2000 Advanced Server documentation for details on installing and configuring Cluster Service. 6. Optionally, install the latest operating system service pack and restart the system. 7. If you elected to install the latest operating system service pack, run the Compaq Support Paq for Windows 2000 to ensure that the latest Compaq drivers have not been overwritten during the installation of the service pack. The ProLiant CL380 is now configured and ready for use. To verify the configuration, see "Verifying Creation of the Cluster" in this chapter. Manual Installation Using SmartStart Performing a manual installation with SmartStart minimizes SmartStart's involvement. The manual installation routine runs the Compaq System Configuration Utility. When you are prompted for the Microsoft Windows 2000 Advanced Server CD, SmartStart transfers the installation procedure to Windows 2000 Advanced Server. Follow the instructions on the Windows 2000 Advanced Server installation screens. To manually install the cluster software using SmartStart, you need the following: I Compaq SmartStart and Support Software CD 4.90 or later I Compaq Management CD 4.90 or later I SmartStart Installation Poster I Microsoft Windows 2000 Advanced Server Configuring the Server Nodes 1. Apply power to the shared storage area and boot server node 1 from the SmartStart and Support Software CD.