Compaq ProLiant CL380 Compaq ProLiant CL380 Software User Guide - Page 85
Updating the Firmware Revision Level of the Original CR3500 RAID Controller
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
CR3500 Configuration Utility 4-33 Updating the Firmware Revision Level of the Original CR3500 RAID Controller Follow these steps if the firmware revision level of the original controller is older than the most recent firmware revision level. 1. Save the existing single controller configuration using the Save Configuration function of the CR3500 Configuration Utility. 2. Suspend all I/O and power down the shared storage subsystem. 3. If you are upgrading controller firmware in Microsoft Windows NT Server 4.0, Enterprise Edition, or Microsoft Windows 2000 Advanced Server environments, open the CR3500 Configuration Utility. Select Storage, Controller, Update Firmware. Enter the path to the location of the firmware downloaded from the Compaq website or the file included with the second controller. The pointing icon will change to an hourglass as the update begins. When the update completes, you can verify the firmware revision level by clicking on the controller icon. If you are upgrading controller firmware under Novell NetWare 4.2 or NetWare 5.1, follow the steps in the section titled "Novell NetWare Firmware Upgrade Procedures." IMPORTANT: Microsoft Cluster Server under Windows NT Server 4.0, Enterprise Edition, Cluster Service under Windows 2000 Advanced Server, SNMP service, and any I/O must be stopped during the firmware update. 4. Power down the shared storage area. 5. Remove the Shared Storage RAID Controller CR3500 from bay 1 (top). 6. Insert the new Compaq Shared Storage RAID Controller CR3500 in bay 1 (top). IMPORTANT: Do not insert the original CR3500 RAID Controller into bay 2 (bottom) at this time. 7. Power up the shared storage area. 8. Restore the controller configuration settings saved in Step 1 using the Restore Configuration function of the CR3500 Configuration Utility. 9. Power down the shared storage area. 10. Remove the CR3500 RAID Controller blanking panel from bay 2 (bottom).