Compaq ProLiant CL380 Compaq ProLiant CL380 Software User Guide - Page 88
Ctrl+C, Enter, Flow control=Xon/Xoff
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
4-36 Compaq ProLiant CL380 Software User Guide 3. Use the following settings to connect: G Bits per second=9600 G Data bits=8 G Parity=None G Stop bits=1 G Flow control=Xon/Xoff 4. Power up the shared storage area and press Ctrl+C to abort the controller boot process. 5. Select option 2 to change the baud rate. 6. Select option 3 to set the baud rate to 38400. 7. Change the baud rate on the terminal to match the controller's baud rate of 38400. 8. Disconnect and reconnect the terminal service. 9. Press Enter to establish communication with the controller. 10. Select option 1 and press Enter. 11. Transfer the firmware file as a text file from the terminal service. The entire update should take about 15 minutes at a 38400 baud rate. 12. After the firmware update is complete, select option 2 and change the baud rate to 9600 by selecting option 1. 13. Change the baud rate to 9600 on the terminal service. 14. Disconnect and reconnect the terminal service. 15. Press Enter to establish communication with the controller. 16. Select option 9 to restart the controller.