D-Link DCS-3420 Product Manual - Page 55
and IP address will vary
UPC - 790069289811
View all D-Link DCS-3420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Section 3 - Configuration In this window, enter the settings for the FTP server you wish to upload the image to. Optionally, you can enter settings for a secondary backup FTP server. Local FTP The Default port is 21. To connect to an server port: FTP server, it is recommended that you do not change the port number unless your camera is behind a router. If your camera is behind a router, you can assign any port number to this field, but you must enable port forwarding on the router. Please refer to your router manual for more information on port forwarding. 1st FTP server: If you are going to upload snapshots to an FTP server, you will need to fill in the Domain name or IP address of your internal/ external FTP server such as ftp://dlink.com or ftp://192.168.0.123. (The server name and IP address will vary depending on the user.) The following user settings must be correctly configured for remote access. 1st FTP server The port of the FTP server. The default is port: 21 for an external FTP site. 1st FTP user Specify the user name to access the name: external FTP server (e.g. John Smith). 1st FTP Specify the password to access the external password: FTP server (e.g. 12345). D-Link DCS-3420 User Manual 55