D-Link DCS-3420 Product Manual - Page 57
In this window, follow the steps below to set
UPC - 790069289811
View all D-Link DCS-3420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Section 3 - Configuration For detailed information about each setting, please refer to Configuration > Advanced > Mail & FTP in the section titled "Using the DCS-3420 With an Internet Browser" (page 30). Click the apply button when finished. Next, click the Applications button under the Tools tab to set the application settings for the DCS-3420. In this window, follow the steps below to set the application settings for snapshots to be recorded to an FTP site: 1. Select the weekdays you would like to record and enter the "Snapshots begin" time and "Snapshots end" time for the weekly schedule, or select "All the time except for the above schedule" if you want to enable full time snapshot recording. 2. Check "Event operation." Set the delay "before detecting next event" to avoid continuous false alarms following the original event. Set the "Snapshot Interval" to capture the direction of the moving object. 3. Check the window name. 4. Check "Upload snapshots while motion detected." 5. Click "Send snapshots by FTP" and check "FTP put snapshots with date and time suffix." 6. Click the "Apply" button to save the settings. Click the apply button when finished. You are now able to record snapshots to your FTP server when motion detection is triggered. D-Link DCS-3420 User Manual 57