D-Link DSM-G600 Product Manual - Page 29

Home > LAN

Get D-Link DSM-G600 - MediaLounge Wireless G Network Storage Enclosure NAS Server PDF manuals and user guides
UPC - 790069273278
View all D-Link DSM-G600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

DSM-G600 User's Manual Home > LAN Using the Configuration Utility Network Type: Select LAN for Wired or Wireless. Device Name: This name represents the DSM-G600 on the network. If this name is changed you must use the new name when accessing the device by name through a web browser (i.e., http://new name). Workgroup: Enter the name of the workgroup here (optional). When "Browsing" for shared folders, during the Mapping a Drive process, you will find the DSM-G600's shared folders listed under the Workgroup Name. (Please refer to the Accessing the DSM-G600 earlier in this manual). Dynamic IP: Select to obtain an IP address from a DHCP server. Static IP: Select to manually assign an IP address. Static IP Address: Enter the address here, when Static IP is selected. This address must be different from any other on the network. Subnet Mask: Enter the subnet mask here, when Static IP is selected. Gateway Address: Enter the gateway address here, when Static IP is selected. This is normally the LAN address of your router. DNS Address: DNS (Domain Name System) is an Internet service that translates domain names into IP addresses. Enter a DNS address here. If you are using a router in your network, you can usually enter the router's LAN IP address as the DNS address. Apply: Click Apply to save the changes. D-Link Systems, Inc. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
29
DSM-G600 User’s Manual
D-Link Systems, Inc.
Using the Configuration Utility
Home > LAN
Select to obtain an IP address from a DHCP server.
Select to manually assign an IP address.
Enter the address here, when Static IP is selected. This address
must be different from any other on the network.
Enter the subnet mask here, when Static IP is selected.
Enter the gateway address here, when Static IP is selected. This is
normally the LAN address of your router.
DNS (Domain Name System) is an Internet service that translates
domain names into IP addresses. Enter a DNS address here. If you
are using a router in your network, you can usually enter the router’s
LAN IP address as the DNS address.
Click Apply to save the changes.
Dynamic IP:
Static IP:
Static IP Address:
Subnet Mask:
Gateway Address:
DNS Address:
Apply:
Device Name:
This name represents the DSM-G600 on the network. If this name
is changed you must use the new name when accessing the device
by name through a web browser (i.e., http://new name).
Workgroup:
Enter the name of the workgroup here (optional). When “Browsing”
for shared folders, during the
Mapping a Drive
process, you will
find the DSM-G600’s shared folders listed under the
Workgroup
Name.
(Please refer to the
Accessing the DSM-G600
earlier in
this manual).
Network Type:
Select
LAN
for Wired or
Wireless
.