D-Link DSM-G600 Product Manual - Page 9
Hardware Installation - power cable
UPC - 790069273278
View all D-Link DSM-G600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
DSM-G600 User's Manual Hardware Installation A. Unscrew the two screws on the back panel of the DSM-G600 to remove the cover. Hardware Installation B. Connect the IDE cable to the IDE cable connector on your hard drive. Note: Make sure the jumper setting on your hard drive is set to Master or Cable Select. C. Connect the power cable to the power connector on your hard drive. D-Link Systems, Inc. 9
9
DSM-G600 User’s Manual
D-Link Systems, Inc.
Hardware Installation
A.
Unscrew the two screws on the
back panel of the DSM-G600 to
remove the cover.
B.
Connect the IDE cable to the IDE
cable connector on your hard
drive.
Note:
Make sure the jumper setting
on your hard drive is set to
Master
or
Cable Select
.
C.
Connect the power cable to the power
connector on your hard drive.
Hardware Installation