Dell E6500 Service Manual - Page 24
Removing the Display Panel Brackets, Replacing the Display Panel Brackets, Display Inverter
UPC - 884116029793
View all Dell E6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Removing the Display Panel Brackets 1. Remove the two M2.5 x 5-mm screws (and two plastic plugs for CCFL displays) from the display panel brackets on either side of the display panel. 2. Remove the display panel brackets. 1 display panel 2 M2.5 x 5-mm screws (2 each) 3 plastic plugs (2) (CCFL displays only) 4 display panel brackets Replacing the Display Panel Brackets NOTE: The display panel brackets are labeled "L" (left) and "R" (right). 1. Replace the display panel brackets. 2. Replace the two M2.5 x 5-m screws (and two each plastic plugs for CCFL displays) on the display panel brackets. Display Inverter Removing the Display Inverter Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance. 1. Follow the instructions in Before Working on Your Computer. 2. Remove the display assembly (see Removing the Display Assembly). 3. Remove the display bezel (see Removing the Display Bezel). 4. Remove the two M2 x 3-mm screws from the display inverter. 5. Disconnect the two display inverter connectors. 6. Lift the display inverter out of the display cover.