Dell E6500 Service Manual - Page 51

Replacing the Right-Speaker and Fingerprint Reader Cover

Page 51 highlights

Replacing the Right-Speaker and Fingerprint Reader Cover Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance. CAUTION: If you are installing a new fingerprint reader/speaker cover assembly, remove the backing paper from the bottom of the cable. 1. If you have a fingerprint reader, connect the fingerprint reader cable. Press along the cable to seal the cable into the palm rest. 2. Snap the speaker/fingerprint reader cover into place 3. Turn the computer upside down, and tighten the two M2.5 x 5-mm captive screws. 4. Replace the keyboard (see Replacing the Keyboard). 5. Replace the LED cover (see Replacing the LED Cover). 6. Replace the optical drive (see Replacing the Optical Drive). 7. Replace the hard drive (see Replacing the Hard Drive) 8. Replace the battery (see Replacing the Battery). Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

Replacing the Right-Speaker and Fingerprint Reader Cover
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance.
1.
If you have a fingerprint reader, connect the fingerprint reader cable. Press along the cable to seal the cable into the palm rest.
2.
Snap the speaker/fingerprint reader cover into place
3.
Turn the computer upside down, and tighten the two M2.5 x 5-mm captive screws.
4.
Replace the keyboard (see
Replacing the Keyboard
).
5.
Replace the LED cover (see
Replacing the LED Cover
).
6.
Replace the optical drive (see
Replacing the Optical Drive
).
7.
Replace the hard drive (see
Replacing the Hard Drive
)
8.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
If you are installing a new fingerprint reader/speaker cover assembly, remove the backing paper from the bottom of the cable.