Dell E6500 Service Manual - Page 70
Replacing the Hinge Covers, Removing the Bottom of the Base Assembly, Replacing the Battery, Back
UPC - 884116029793
View all Dell E6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Replacing a WPAN/UWB Card CAUTION: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card. CAUTION: To avoid damage to the WPAN/UWB card, ensure the cable is not under the card when you replace the card. CAUTION: WPAN/UWB/FCM is silk-screened inside the Mini-Card slot. Do not install WPAN (BT/UWB) cards in any other slot. 1. Slide the WPAN/UWB card into the connector. 2. Press the card down to the alignment post and hold in position. 3. Replace the screw in the WPAN/UWB card. 4. Connect the blue antenna cable to the WPAN/UWB card. 5. Replace the left hinge cover (see Replacing the Hinge Covers). 6. Replace the bottom of the base assembly (see Removing the Bottom of the Base Assembly). 7. Replace the battery (see Replacing the Battery). Back to Contents Page