Dell Inspiron 1545 Service Manual - Page 22
Daughter Board
View all Dell Inspiron 1545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Back to Contents Page Daughter Board Dell™ Inspiron™ 1545 Service Manual Removing the Daughter Board Replacing the Daughter Board CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer. NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. Removing the Daughter Board 1. Follow the instructions in Before You Begin. 2. Remove the palm rest (Removing the Palm Rest). 3. Remove the three screws that secure the daughter board. 4. Lift the daughter board out of the computer. 1 daughter board 2 screws (3) Replacing the Daughter Board 1. Align the daughter board with the system board connector and with the screw holes on the computer base. 2. Replace the three screws that secure the daughter board. NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. 3. Replace the palm rest (Replacing the Palm Rest). Back to Contents Page