Dell Inspiron 1545 Service Manual - Page 23

Back to Contents Page Display Dell™ Inspiron™ 1545 Service Manual Display Assembly Display Bezel Display Panel Display Panel Cable Display Inverter CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer. NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. Display Assembly Removing the Display Assembly NOTE: The location of the Mini-Card may change according to the display adapter supported by your computer. To find the type of display adapter on your computer, click Start® Control Panel® System® Device Manager® Display adapters. 1. Follow the instructions in Before You Begin. 2. Remove the center control cover (see Removing the Center Control Cover). 3. Remove the base cover (see Removing the Base Cover). 4. Disconnect the Mini-Card cables from the Mini-Card, if applicable. 5. Make note of the cable routing and carefully dislodge the Mini-Card antenna cables from their routing guides. ATI Mobility Radeon: Mobile Intel® GMA: