Dell Latitude E6230 Owner's Manual - Page 20
Installing the Palmrest, After Working Inside Your Computer. - touchpad not working
View all Dell Latitude E6230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
8. Press downward on the palmrest from the base of the computer. 9. Remove the palmrest. Installing the Palmrest 1. Align the palmrest to its slot. 2. Press along the sides of the palmrest until it snaps in place. 3. Flip the computer and tighten the screws that secures the palmrest in place. 4. Connect the following cables: a) touchpad b) Smart Card reader c) SD card reader 5. Install the: a) cover b) battery 6. Follow the procedures in After Working Inside Your Computer. 20
8.
Press downward on the palmrest from the base of the computer.
9.
Remove the palmrest.
Installing the Palmrest
1.
Align the palmrest to its slot.
2.
Press along the sides of the palmrest until it snaps in place.
3.
Flip the computer and tighten the screws that secures the palmrest in place.
4.
Connect the following cables:
a)
touchpad
b)
Smart Card reader
c)
SD card reader
5.
Install the:
a)
cover
b)
battery
6.
Follow the procedures in
After Working Inside Your Computer.
20