Dell Latitude E6230 Owner's Manual - Page 31
Installing the Hall Sensor, Removing the Coin-Cell Battery - 3 cell battery
View all Dell Latitude E6230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Installing the Hall Sensor 1. Replace the hall sensor in its slot. 2. Tighten the screw to secure the hall sensor. 3. Route and connect the hall sensor cable. 4. Install the: a) base chassis b) speakers c) heat-sink fan d) bluetooth module e) keyboard f) palmrest g) base cover h) battery i) ExpressCard j) SD card 5. Follow the procedures in After Working Inside Your Computer. Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) SD Card b) ExpressCard c) battery d) cover e) palmrest f) keyboard g) bluetooth module h) heat-sink fan i) speakers j) base chassis 3. Disconnect the coin-cell battery cable. 31
Installing the Hall Sensor
1.
Replace the hall sensor in its slot.
2.
Tighten the screw to secure the hall sensor.
3.
Route and connect the hall sensor cable.
4.
Install the:
a)
base chassis
b)
speakers
c)
heat-sink fan
d)
bluetooth module
e)
keyboard
f)
palmrest
g)
base cover
h)
battery
i)
ExpressCard
j)
SD card
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
SD Card
b)
ExpressCard
c)
battery
d)
cover
e)
palmrest
f)
keyboard
g)
bluetooth module
h)
heat-sink fan
i)
speakers
j)
base chassis
3.
Disconnect the coin-cell battery cable.
31