Dell Latitude E6230 Owner's Manual - Page 45

Removing the Camera, After Working Inside Your Computer

Get Dell Latitude E6230 PDF manuals and user guides View all Dell Latitude E6230 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

3. Route the antenna cables through the routing channel. 4. Connect the antenna cables to the computer. 5. Route and connect the LVDS cable. 6. Place the LVDS bracket in its slot. 7. Tighten the screws to secure the LVDS bracket to the computer. 8. Route and connect the antenna cables that are connected to the wireless solutions. 9. Flip the computer and tighten the screws at the bottom. 10. Install the: a) keyboard b) palmrest c) base cover d) battery e) ExpressCard f) SD card 11. Follow the procedures in After Working Inside Your Computer. Removing the Camera 1. Follow the procedures in Before Working On Your Computer. 2. Remove the: a) battery b) display bezel 3. Peel away the conductive tape. 4. Remove the screw that secures the camera to the display assembly. 5. Lift up the right edge of the camera. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
3.
Route the antenna cables through the routing channel.
4.
Connect the antenna cables to the computer.
5.
Route and connect the LVDS cable.
6.
Place the LVDS bracket in its slot.
7.
Tighten the screws to secure the LVDS bracket to the computer.
8.
Route and connect the antenna cables that are connected to the wireless solutions.
9.
Flip the computer and tighten the screws at the bottom.
10.
Install the:
a)
keyboard
b)
palmrest
c)
base cover
d)
battery
e)
ExpressCard
f)
SD card
11.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Camera
1.
Follow the procedures in
Before Working On Your Computer
.
2.
Remove the:
a)
battery
b)
display bezel
3.
Peel away the conductive tape.
4.
Remove the screw that secures the camera to the display assembly.
5.
Lift up the right edge of the camera.
45