Dell Latitude E6230 Owner's Manual - Page 36
Installing the Power-Connector Port, Removing the ExpressCard Cage
View all Dell Latitude E6230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installing the Power-Connector Port 1. Insert the power-connector port in its slot. 2. Connect the power connector to the system board. 3. Install the: a) base chassis b) speakers c) heat-sink module d) heat-sink fan e) bluetooth module f) keyboard g) palmrest h) base cover i) battery j) ExpressCard k) SD card 4. Follow the procedures in After Working Inside Your Computer. Removing the ExpressCard Cage 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) SD card b) ExpressCard c) battery d) base cover e) palmrest f) keyboard g) bluetooth module h) heat sink i) speakers j) base chassis 3. Disconnect the ExpressCard reader cable. 4. Remove the screws that secure the ExpressCard cage to the computer. 36
Installing the Power-Connector Port
1.
Insert the power-connector port in its slot.
2.
Connect the power connector to the system board.
3.
Install the:
a)
base chassis
b)
speakers
c)
heat-sink module
d)
heat-sink fan
e)
bluetooth module
f)
keyboard
g)
palmrest
h)
base cover
i)
battery
j)
ExpressCard
k)
SD card
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the ExpressCard Cage
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
SD card
b)
ExpressCard
c)
battery
d)
base cover
e)
palmrest
f)
keyboard
g)
bluetooth module
h)
heat sink
i)
speakers
j)
base chassis
3.
Disconnect the ExpressCard reader cable.
4.
Remove the screws that secure the ExpressCard cage to the computer.
36