Dell Latitude E6230 Owner's Manual - Page 24
Installing the Wireless Local Access Network (WLAN), Removing the Heat-Sink Fan
View all Dell Latitude E6230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installing the Wireless Local Access Network (WLAN) 1. Insert the WLAN card into its connector at a 45-degree angle into its slot. 2. Tighten the screw to secure the WLAN card to the computer 3. Connect the antenna cables to their respective connectors marked on the WLAN card. 4. Install the: a) base cover b) battery c) ExpressCard d) SD Card 5. Follow the procedures in After Working Inside Your Computer. Removing the Heat-Sink Fan 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) SD Card b) ExpressCard c) battery d) base cover 3. Disconnect the heat-sink fan cable. 4. Remove the screws that secure the heat-sink fan to the computer. 24
Installing the Wireless Local Access Network (WLAN)
1.
Insert the WLAN card into its connector at a 45–degree angle into its slot.
2.
Tighten the screw to secure the WLAN card to the computer
3.
Connect the antenna cables to their respective connectors marked on the WLAN card.
4.
Install the:
a)
base cover
b)
battery
c)
ExpressCard
d)
SD Card
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Heat-Sink Fan
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
SD Card
b)
ExpressCard
c)
battery
d)
base cover
3.
Disconnect the heat-sink fan cable.
4.
Remove the screws that secure the heat-sink fan to the computer.
24