Dell PowerConnect Brocade 300 Fabric OS Administrator's Guide v7.1.0 - Page 429

Supported switches and configurations for FA-PWWN 16 3. Enter the fapwwn --show -port all command: You should see output similar to the following sample. Port PPWWN VPWWN PID Enable MapType 0 52:00:10:00:00:0f:50:30 10101 Yes Port/Auto 1 11:22:33:44:33:22:11:22 -- Yes Port/User 52:00:10:00:00:0f:50:44 10 52:00:10:00:00:0f:50:45 -- Yes Port/Auto 4. Enable the FA-PWWN on the HBA. The following steps are to be executed on the server and not the switch. a. Log in to the server as root. b. Enter the following command: bcu port -faa port_id --enable c. Enter the following command: bcu port -faa port_id --query Once the Brocade HBA has been assigned the FA-PWWN, the HBA retains the FA-PWWN until it is rebooted. This means you cannot unplug and plug the cable into a different port on the switch. You must reboot the HBA before moving the HBA to a different port. If you move an HBA to a different port on a switch running Fabric OS v7.0.0 or later, the HBA will disable its port. If the HBA moves to a different port on a switch running a version of Fabric OS earlier than 7.0.0, the HBA will continue to disable its port. Supported switches and configurations for FA-PWWN The FA-PWWN feature is supported on the following platforms: • Switch platforms running Fabric OS v7.0.0 or later: - Brocade DCX, DCX-4S, and DCX 8510 family - Brocade 300 - Brocade 5100 - Brocade 5300 - Brocade 6505 - Brocade 6510 - Brocade 6520 - Brocade 7800 - Brocade VA-40FC Fabric OS Administrator's Guide 429 53-1002745-02